`Parts List for Shutter Controller Rev.1.2`

Changes for Rev 1.2:

changed R1 : 100k -> 4k7, R3 : 10k -> 4k7
added D4 : 1N4148 parallel to R14
added Q2 : BC547B (optional for open collector output)

Changes for Rev 1.1:

changed C1 : 270n -> 330n
added D2:ZPD4,7 and R14:1k0

`Pads for Connection between PCBs and exernal Parts`

pads for connection between top and bottom PCB (square)

0VB      SQR_PAD \_ connect
0VT      SQR_PAD /
9VB      SQR_PAD \_ connect
9VT      SQR_PAD /
GPB      SQR_PAD \_ connect
GPT      SQR_PAD /
SIB      SQR_PAD \_ connect
SIT      SQR_PAD /
SOB      SQR_PAD \_ connect
SOT      SQR_PAD /

pads for connection to switches/LED (round/octogonal)

0VF      WIREPAD
9VF      WIREPAD
LED      WIREPAD
LR       WIREPAD
LR_IN    WIREPAD
SG       WIREPAD
SG1      WIREPAD (optional open collector output for Q2, added for Rev 1.2)
SP       WIREPAD
SYIN     WIREPAD
SYOUT    WIREPAD
TGLR     WIREPAD
X1       WIREPAD
X1X2     WIREPAD
X2       WIREPAD

`Electronic and Mechanical Parts`

[catalogue numbers and prices in DeutschMark of Conrad electronics, Germany for reference or direct orders when applicable. Note that Conrad is not famous for low prices, so you should find a cheaper local dealer]

switches (S2 and S3 are optional)

S1 Mode on/on single pole [701343, DM 1,15]

S2 SyncPol on/off/on single pole [703036, DM 4,35]

S3 L/R on/on single pole [701343, DM 1,15]

S4 Input on/on single pole [701343, DM 1,15]

S5 ON/OFF on/on 2-pole [701351, DM 1,15]

capacitors (ordered by value)

C2       3n3/400V               MKT/MKH 7,5mm   [460796, DM 0,42]
C5       100n(0ľ1)/100V         MKT/MKH 10mm    [461415, DM 0,47]
                        or      MKT/MKH 7.5m    [461024, DM 0,42]
C1       330n(0ľ33)/100V        MKT/MKH 10mm    [461334, DM 0,84]
                        or      MKT/MKH 7,5mm   [461059, DM 0,67]
C3       470n(0ľ47)/100V        MKT/MKH 10mm    [461342, DM 0,90]
                        or      MKT/MKH 7,5mm   [461067, DM 0,84]
C4       22ľF/16V Tantal                        [481750, DM 1,25]

semiconductors (ordered by type/value)

D1       1N4148                                 [162280, DM 0,07]
D2       ZPD 4,7                                [180084, DM 0,29]
D3       LED 3mm yellow                         [145980, DM 0,39]
         + clip. e.g.                           [185906, DM 0,22]
D4       1N4148 (parallel to R14, added in V1.2)[162280, DM 0,07]
IC2      4027                                   [172600, DM 1,30]
IC1      4046                                   [172880, DM 1,95]
IC4      4070                                   [172960, DM 1,00]
IC3      4538                                   [173835, DM 1,85]
         3 x DIL16 socket, flat                 [189626, DM 0,90]
         DIL14 socket, flat                     [189618, DM 0,80]
Q1, Q2   BC547B (Q2 optional, added in V1.2)    [155012, DM 0,25]

resistors - all 1/4 W [DM 0,15 each] (ordered by value)

values marked (*) are not critical and may be replaced by other values +/- 20% when not available

R10,R11 330 (*) [403199]

R14 1k (*) [403253]

R8 2k2 (*) [403296]

R1,R3 4k7 (*) (changed) [403377]

R9 22k [403415]

R4 33k [403431]

R6 68k [403474]

R13 100k (*) [403490]

R12 120k (*) [403504]

R5 470k [403571]

R7 820k [403601]

R2 1M (*) [403610]

other

G1       AB9V           battery 9V Block        [613983, DM 3,80]
         + battery clip                         [496979, DM 0,20]
J1       VSNC/LR    PG203J 3.5mm stereo jack   [734101, DM 1,10]
J2       LCD        PG203J 3.5mm stereo jack   [734101, DM 1,10]

plastic case (L x W x H) 101 x 60 x 26 mm (min.)
with bay for 9V battery [522864, DM 6,50]

PCB 100 x 60 mm, blank or with UV-sensitive etch-resist.
e.g. Epoxy Photo-resist 100x60 mm [525472, DM 2,30]

connectors for adaptor cables :

VGA dongle :

15pin/3 rows DSUB (VGA) male [742716, DM 2,00]

15pin/3 rows DSUB (VGA) female [742724, DM 2,00]

3,5 mm stereo plug [741698, DM 1,15]

+ cable : 2 wires+shield, length as needed

Serial/Parallel port adaptor:

25pin DSUB male (LPT) [741671, DM 1,00]

9pin DSUB female (COM) [742082, DM 0,80]

resp. 25pin DSUB female (COM) [741698, DM 1,15]

3,5 mm stereo plug [741698, DM 1,15]

+ cable : 1 wire + shield, length as needed

VESA DIN-3 adaptor:

3pin mini-DIN plug [731773, DM 1,70]

3,5 mm stereo plug [741698, DM 1,15]

+ cable : 1 wire + shield, length as needed